1. Fix the bracket on the heater through two M6 screws, and then fix the lifting ring on the bracket.

2. Fix the hook expansion screw on the top wall.

3. Use iron buckles to fix one end of the iron chain on the expansion hook, and then use iron buckles to fix the other end of the iron chain on the lifting ring.

4. Plug the power plug into a suitable grounding socket.

5. Turn on the power switch and you can use it.

6. The default heating is high gear when starting up. Touch the "Power Setting" button to switch to medium gear, press it again to switch to low gear, and then press it again to switch to high gear.

7. When not in use, turn off the power switch first, and then unplug the plug from the socket.

How to use the remote control:

1. Press the "ON/OFF" key to start the machine.

2. Press the "HIGH" key once to switch to high gear (2000W), press the "MID" key once to switch to medium gear (1200W), and press the "LOW" key once to switch     to low gear (800W).

3. Press the "OFF" key once to enter the standby mode.